Automon Startup on TS7390
Today I modified some run level scripts on the embedded Linux. I set up the environment variables and locations of libs in the /etc/rc.local script. This script runs at end of run level 2, in multi user mode and Automon automatically starts. Now all I have to do is connect the TS7390 to the car and turn it on. I also purchased an inverter for the car today that works so no need for DIY circuits at the moment to power the SBC.
Anyways Automon now starts up on start up of the TS7390 so no more need for telnetting into the board.
Leave a Reply
You must be logged in to post a comment.
Tags
Archives
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| « Nov | ||||||
| 1 | ||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| 16 | 17 | 18 | 19 | 20 | 21 | 22 |
| 23 | 24 | 25 | 26 | 27 | 28 | 29 |
| 30 | 31 | |||||
Blogroll
QT Programming
Single Board Computers (SBCs)
Recent Comments
- Mark Mikaelsen on QT and QExtSerialPort
- Mark Mikaelsen on QT and QExtSerialPort
- Donal on QT and QExtSerialPort
- Dmitriy on QT and QExtSerialPort
- Donal on QT and QExtSerialPort