ECU/EOBD Simulator
KWP2000 Simulator
Today I decided to look for a proper OBD II/EOBD simulator. This would save so much hassle as I wouldn’t have to be going out to the car every second checking if a change made works. Further more, currently my SBC is plugged into a mains so it awkward getting it powered up in the car.
I decided to go with the KWP2000 protocol simulator as this is the same one in my car. I guess I really should pick another one and get tested on both types but I can simply just plug into another car later on anyways.
The one I went with cost 99 euro and is on this page: http://www.ozenelektronik.com/?s=products2&group=eobd-obdii-ecu-simulators
This project is costing me a fortune! – Hopefully everything will pay off in the end now.
Leave a Reply
You must be logged in to post a comment.
Tags
Archives
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| « Nov | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| 14 | 15 | 16 | 17 | 18 | 19 | 20 |
| 21 | 22 | 23 | 24 | 25 | 26 | 27 |
| 28 | 29 | 30 | 31 | |||
Blogroll
QT Programming
Single Board Computers (SBCs)
Recent Comments
- Mark Mikaelsen on QT and QExtSerialPort
- Mark Mikaelsen on QT and QExtSerialPort
- Donal on QT and QExtSerialPort
- Dmitriy on QT and QExtSerialPort
- Donal on QT and QExtSerialPort